gtAdmin/CatTools
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix: Bind interface

Browse Source
This commit is contained in:
喵二
2024-09-01 17:00:46 +08:00
parent a0aa0cfcb1
commit cf883a0b45
1 changed files with 40 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
cattools.sh
View File

@@ -274,26 +274,29 @@ network_wizard() {
echo "Press [Enter] to configure network interfaces, press [1] to skip"
read -p " /// [Enter] 确认配置网口，按 [1] 跳过: " configure_network
if [ "$configure_network" != "1" ]; then
# Get All ETH
interfaces=$(ls /sys/class/net | grep -E 'eth[0-9]+')
iface_count=$(echo "$interfaces" | wc -w)
# Get All ETH
interfaces=$(ls /sys/class/net | grep -E 'eth[0-9]+')
iface_count=$(echo "$interfaces" | wc -w)
if [ "$iface_count" -eq 1 ]; then
echo "[Step10] Detected a single network interface, no configuration needed /// 检测到单个网口，无需配置"
if [ "$iface_count" -eq 1 ]; then
echo "[Step10] Detected a single network interface, no configuration needed"
echo " /// 检测到单个网口，无需配置"
elif [ "$iface_count" -eq 2 ]; then
echo "[Step10] Detected two network interfaces, configuration not recommended"
echo " /// 检测到两个网口，不推荐配置"
echo "Press [Enter] to skip, press [1] to configure /// ( [Enter] 跳过 ，按 [1] 配置)"
read -p " " continue_network
if [ "$continue_network" != "1" ]; then
echo "[Step10] Skipping network interface configuration /// 跳过网口配置"
else
echo
echo "[Step10] Detected multiple network interfaces /// 检测到多个网口"
# ETH0 set WAN，ETH123 set LAN
bridge_ports=""
for iface in $interfaces; do
if [ "$iface" != "eth0" ]; then
bridge_ports="$bridge_ports $iface"
fi
done
uci set network.wan.ifname='eth0'
uci set network.wan.proto='dhcp'
uci set network.lan.type='bridge'
uci set network.lan.ifname="$bridge_ports"
uci set network.lan._orig_ifname="$bridge_ports"
@@ -308,7 +311,28 @@ network_wizard() {
echo "[Step10] Network interfaces configured: WAN (ETH0), LAN ($bridge_ports) /// 网口已配置: WAN (ETH0), LAN ($bridge_ports)"
fi
else
echo "[Step10] Skipping network interface configuration /// 跳过网口配置"
echo "[Step10] Detected multiple network interfaces /// 检测到多个网口"
echo "[Step10] Configuring network interfaces... /// 开始配置网口..."
bridge_ports=""
for iface in $interfaces; do
if [ "$iface" != "eth0" ]; then
bridge_ports="$bridge_ports $iface"
fi
done
uci set network.wan.ifname='eth0'
uci set network.wan.proto='dhcp'
uci set network.lan.type='bridge'
uci set network.lan.ifname="$bridge_ports"
uci set network.lan._orig_ifname="$bridge_ports"
uci set network.lan._orig_bridge='true'
uci set network.wan6._orig_bridge='false'
uci set network.wan6._orig_ifname='eth1'
uci set network.wan6.ifname='eth0'
uci set network.wan6.reqaddress='try'
uci set network.wan6.reqprefix='auto'
echo "[Step10] Network interfaces configured: WAN (ETH0), LAN ($bridge_ports) /// 网口已配置: WAN (ETH0), LAN ($bridge_ports)"
fi
else
echo "[Step10] System architecture $arch is not supported. No changes made. /// 系统架构 $arch 不支持该脚本，未进行任何更改"
@@ -328,11 +352,11 @@ bypass_gateway() {
# 输入主路由的 IP 地址
while true; do
echo ""
read -p "[Step3] 请输入主路由的 IP 地址（例如 192.168.31.1）：" router_ip
read -p "[Step3] 请输入主路由的 IP 地址 (如 192.168.31.1): " router_ip
if [ -z "$router_ip" ]; then
echo "主路由 IP 地址不能为空，请重新输入。"
echo "[ERROR] 主路由 IP 地址不能为空，请重新输入。"
elif ! echo "$router_ip" | grep -Eq '^(10|172\.(1[6-9]|2[0-9]|3[01])|192\.168)\.'; then
echo "输入的 IP 地址无效，请输入有效的 IP 地址"
echo "[ERROR] 输入的 IP 地址无效，请输入有效的 IP 地址"
else
break
fi
@@ -348,7 +372,7 @@ bypass_gateway() {
device_ip="$default_device_ip"
break
elif ! echo "$device_ip" | grep -Eq '^(10|172\.(1[6-9]|2[0-9]|3[01])|192\.168)\.'; then
echo "输入的 IP 地址无效，请输入有效的 IP 地址。"
echo "[ERROR] 输入的 IP 地址无效，请输入有效的 IP 地址。"
else
break
fi
@@ -414,7 +438,7 @@ bypass_gateway() {
/etc/init.d/dnsmasq restart
echo
echo "[INFO] 如出现 Warning 是因为旁路的防火墙是这样报错的，部分配置可以忽略不影响使用"
echo "[INFO] 如出现 Warning 是因为旁路防火墙是这样报错的，部分配置可以忽略不影响使用"
echo
}